STOPGAP 600

STOPGAP 600 is a base compound designed for use where floor levels need to be raised quickly and economically in light to heavy-duty applications onto sound absorbent and non-absorbent subfloors.
STOPGAP 600 sets sufficiently in as little as 3 hours allowing it to be capped with STOPGAP Fast Track 30, 300,1200 or 1500 self-smoothing underlayments prior to the installation of new floorcoverings. STOPGAP 600 is also suitable for use under STOPGAP 800 Wearcoat.
STOPGAP 600 is dimensionally stable and is supplied as a pre-blended dry powder, which is designed for application between 5-50mm in one application. It is protein-free which allows it to be used in biologically sensitive areas.
STOPGAP 600 is suitable for use over a wide range of subfloor types including sand/ cement screed, concrete, granolithic, terrazzo, epoxy and polyurethane resins, ceramic and quarry tiles and STOPGAP waterproof surface membranes.
Tested in accordance with IMO FTP Code procedures, STOPGAP 600 is in compliance with the Merchant Shipping (Marine Equipment) Regulations 2016, S.I. 2016/1025, and the Marine Equipment
Directive 2014/90/EU, and approved for use as a primary deck covering. USCG Approval No(s): 164.106/1121/WCL MER0529, 164.106/ERO2812/ MED0529
COVERAGE
A 25kg bag of STOPGAP 600 mixed with 4.25 litres of clean water will cover approximately 2.8m2 at a thickness of 5mm.
TECHNICAL INFORMATION
FEATURES
• Deep section
• Fast drying
• Protein free
• Thickness from 5-50 mm in one application • Suitable for hand or pump application
• Low odour
• Approved for marine use
EN13813:2002
The above standard refers to the properties and performance of the product and the specification to which it has been tested. The data shown confirms the minimum compressive and flexural strengths that the product will achieve.
PACKAGES
25kg lined paper sacks.
HOW MUCH MATERIAL?
Note. Coverage rates for 5-15mm are based on 4.25 litre water addition and for 20-50mm are based on 4.0 litre water addition.These figures will vary according to the condition of the subfloor..
EN 13813 Class Designation
Working Time @ 20°C
CT-C30-F7
20 - 30 minutes
Walk on hardness time @ 20°C
3 hours
Ready to receive floor smoothing compounds
3 hours
APPLIED THICKNESS
COVERAGE PER UNIT
CONSUMPTION PER 100m2 AREA
5mm
2.8m2
36 bags
15mm
0.9m2
110 bags
20mm
0.7m2
147 bags
50mm
0.3m2
370 bags
Compressive Strength N/mm2 (EN13892-2) 1 Day
7 Days 28 Days
Flexural Strength N/mm2
(EN13892-2) 1 Day
7 Days 28 Days
>15.0 >25.0 >30.0
>2.0 >5.0 >7.0
Flow properties using 30mm ø x 50mm flow ring (EN 12706)
110-130 mm
Consumption per mm thickness
1.81 kg / m2
Application thickness
5-50 mm