Skip to product information
1 of 1

Bliss Flooring

STYCCOBOND F3

STYCCOBOND F3

Regular price £30.00 GBP
Regular price Sale price £30.00 GBP
Sale Sold out
Tax included. Shipping calculated at checkout.
Size

STYCCOBOND F3 is a water based rubber/resin flooring adhesive that has excellent wet grab with an early build up of strength. It is protected against bio-degradation and is suitable for use over normal underfloor heating installations.
STYCCOBOND F3 can be used for securing fibre bonded carpets, hessian, felt, secondary latex and rubber foam backed carpets and cork tiles up to 3.2mm thick.
See the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.
Tested in accordance with IMO FTP Code procedures, STYCCOBOND F3 is in compliance with the Merchant Shipping (Marine Equipment) Regulations 2016, S.I. 2016/1025, and the Marine Equipment Directive 2014/90/EU, and approved for use as an adhesive for flooring applications only. USCG Approval No(s): 164.112/1121/WCL MER0392, 164.112/ERO2812/MED0392
STYCCOBOND F3 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard.
STOPGAP waterproof surface membranes, sound flooring grade asphalt and some non-absorbent surfaces must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.
STYCCOBOND F3 can be applied directly to some non-absorbent subfloors such as Power Floated Concrete,Terrazzo and Granolithic, however, impervious backed floorcoverings should not be adhered directly to these subfloors and a suitable STOPGAP smoothing underlayment should be applied.
For details on other subfloors, contact our Technical Service Department.
TECHNICAL INFORMATION
Colour
Cream /Yellow
Consistency
Viscous Liquid
Coverage Rate (Approx.)
3m2 per litre using a 2mm x 6mm trowel
Open Time
Up to 15 minutes depending on temperature, humidity and absorbency of the subfloor

View full details