STYCCOBOND F46

STYCCOBOND F46 is a solvent free pressure sensitive acrylic adhesive that dries
to a permanent tacky film. It is used to reduce the incidence of trowel serrations shadowing through thin vinyl flooring and is designed to give strong initial tack and a high bond strength. It has an infinite open time, protected against biodegradation and is suitable for use over normal underfloor heating installations.
STYCCOBOND F46 can be used for securing a wide range of PVC sheet and tile floorcoverings.
See the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.
STYCCOBOND F46 has been tested in accordance with IMO FTP Code procedures, STYCCOBOND F46 is in compliance with the Merchant Shipping (Marine Equipment) Regulations 2016, S.I. 2016/1025, and the Marine Equipment Directive 2014/90/EU, and approved for use as an adhesive for flooring applications only. USCG Approval No(s): 164.112/1121/WCL MER0401,164.112/ERO2812/MED0401
STYCCOBOND F46 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard.
Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.
STYCCOBOND F46 can be applied directly to epoxy resin STOPGAP waterproof surface membranes and other non-absorbent subfloors where the surface finish is smooth enough to permit the installation of resilient floorcoverings.
For details on other subfloors contact our Technical Service Department.
TECHNICAL INFORMATION
Colour
White
Consistency
Viscous Liquid
Coverage Rate (Approx.)
3m2 per litre with a STYCCOBOND A2 trowel
4m2 per litre with a STYCCOBOND FINE NOTCH (A1) 5m2 per litre with 1.5mm x 5mm trowel
Drying Time (Approx.)
40 minutes depending on temperature, humidity and absorbency of the subfloor