STYCCOBOND F73PLUS

STYCCOBOND F73PLUS is a single pack, fibre-reinforced moisture curing heavy duty flooring adhesive suitable for installing a wide range of floorcoverings and for artificial grass. It is water resistant and suitable for outdoor use, however, it is not intended to be used as or as a substitute for a surface damp proof membrane. It is resistant to oil and grease and is suitable for use over normal underfloor heating systems.
STYCCOBOND F73PLUS can be used for securing needlepunched / fibre bonded carpets, artificial grass, PVC, latex, polyurethane and rubber backed carpets, vinyl and rubber floorings, in both sheet and tile format.
Refer to the F. Ball Recommended Adhesives Guide for details of specific floorcoverings
STYCCOBOND F73PLUS can be applied to STOPGAP smoothing underlayments, sound, smooth subfloors of concrete, granolithic, sand/cement screeds and plywood.
For installation onto non-absorbent subfloors, contact our Technical Service Department.
TECHNICAL INFORMATION
Colour
White
Consistency
Viscous liquid
Coverage Rate (Approx.)
3.3m2 per kg with an A2 trowel
2.6m2 per kg with a 2mm x 6mm trowel 1.8m2 per kg with a 3mm x 6mm trowel
Open Time
20 - 30 minutes depending on temperature, humidity and absorbency of the subfloor
Cure Time
Initial set from 90 minutes Full cure 24 hours