Skip to product information
1 of 1

Bliss Flooring

STYCCOBOND F81

STYCCOBOND F81

Regular price £0.00 GBP
Regular price Sale price £0.00 GBP
Sale Sold out
Tax included. Shipping calculated at checkout.

STYCCOBOND F81 is a solvent free, two-part epoxy adhesive designed for use in areas that may be subject to surface water. When the adhesive has cured it is resistant to water, oil and grease. Although it is suitable for outdoor use, it is not intended to be used as, or a substitute for a waterproof surface membrane.
STYCCOBOND F81 can be used for securing a wide range of floorcoverings including some vinyl and rubber floorings, PVC backed synthetic grass carpet and fibrebonded carpets.
See the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.
Tested in accordance with IMO FTP Code procedures, STYCCOBOND F81 is in compliance with the Merchant Shipping (Marine Equipment) Regulations 2016, S.I. 2016/1025, and the Marine Equipment Directive 2014/90/EU, and approved for use as an adhesive for flooring applications only. USCG Approval No(s): 164.112/1121/WCL MER0402, 164.112/ERO2812/MED0402
STYCCOBOND F81 can be applied to STOPGAP smoothing underlayments, sound, smooth subfloors of concrete, granolithic, sand/cement screeds, plywood and bright steel.
Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.
For details on other subfloors, contact our Technical Service Department.
TECHNICAL INFORMATION
Colour
Resin
Yellow
Hardener
Blue
Mixed
Green
Consistency
Creamy
Coverage Rate (Approx.)
2m2 per kg using a 1.5mm x 5mm or A2 trowel 1.2m2 per kg using a 2mm x 6mm or B2 trowel
Pot Life
Up to 60 minutes depending on the temperature of the subfloor
Working Time (Approx.)
2 hours at 20°C
Cure Time
At 18°C will allow foot traffic in 24 hours, light wheeled traffic in 3 days and normal use after 7 day

View full details