STYCCOBOND F84

STYCCOBOND F84 is a two-part reactive epoxy adhesive designed for installing a wide range of sheet floorcoverings onto STOPGAP ISOLATOR MEMBRANE and other suitable substrates. It is ideal for use in areas that are subject to surface water and areas that are heavily trafficked.When cured the adhesive is resistant to water, oil and grease. Although it is suitable for outdoor use it is not intended to be used as, or a substitute for a waterproof surface membrane.
STYCCOBOND F84 can be used for securing a wide range of vinyl and rubber floorcoverings, sheet linoleum and textile floorcoverings.
Refer to the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.
STYCCOBOND F84 can be applied to STOPGAP smoothing underlayments, Isolator Membrane, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard, hardboard and bright steel.
STOPGAP waterproof surface membranes, sound flooring grade asphalt and other non-absorbent surfaces must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.
When used in conjunction with STOPGAP ISOLATOR MEMBRANE, please refer to the technical data sheet for detailed guidance.
For details on other subfloors, contact our Technical Service Department.
TECHNICAL INFORMATION
Colour
Light beige when mixed
Consistency
Creamy
Coverage Rate (Approx.)
3m2 per kg using a 1.5mm x 5mm trowel or 2m2 per kg using a 2mm x 6mm trowel
Pot Life
Up to 20 minutes depending on temperature, humidity and absorbency of the subfloor
Working Time (Approx.)
1 hour at 20°C
Cure Time
At 20°C will allow foot traffic in 12 hours and normal use after 5 days. Avoid heavy point loads until the adhesive has fully cured – approximately 7 days